P2 or P3

Discussion in 'Tires / Brakes / Bearings / Axles' started by SteveP, Mar 14, 2018.

  1. SteveP

    SteveP Well-Known Member

    1,020
    192
    May 21, 2015
    I'm probably going to replace my old 1st gen Prodigy, haven't completed troubleshooting yet but it's pretty much a done deal. Leaning toward the P2 because it's identical, box and controls, to my old one. Why did you choose one over the other?
     
  2. tenttrailer

    tenttrailer Art & Joyce - Columbus, O

    2,747
    143
    Jul 18, 2013
    Thornville, OH
    MY IQ brake controller went last year. It took awhile to troubleshoot it. In looking at the brake controlers I decided to go with the P3 only because it has all the voltage meters for the voltages on the wires and a current meter for the brake output. If I had this meter before it would have been very quick to determine if the problem was the brake controller. Only thing I had to change was the bracket, wires and harness was the same.
     
    SteveP likes this.
  3. SteveP

    SteveP Well-Known Member

    1,020
    192
    May 21, 2015
    Thanks Art, that's the kind of info I need.
     
  4. Fless

    Fless Active Member

    What pushed me to the P3, also, was the display. Never had a controller before but had used one with a friend's TV and trailer, but it was bare bones.
     

Share This Page