Separate names with a comma.
"here" you have to plate it on what it normally weighs, higher if you want to carry a load. They didn't care weight of trailer you pulled, just...
Have one in my F150. Works good, I like that I can program it for different trailers, just select which trailer I am hitched to and all my...
Nice. Everything rusts out and falls apart up here before it can make it that far.
Nice. I towed with a 6-speed for years. Nothing better than full control. Only got an automatic since manual trucks that could tow what size...
For the Maritimes, "Provincial" campgrounds, the ones run by the governments are generally quieter, cater to "camping" and have bigger sites,...
Generally September is "off season" and there are still campgrounds open NB/NS/PEI, I usually camp 2 or 3 weekends in September. Once you hit...
Pop up no worries, with the TT a headwind is what I hate. MPG eater..... I have one of those cam lock WD hitches, supposed to reduce sway and...
Did you swap ratios or was it factory? I can remember looking at the specs, at least for a 2010 5.3 and 3.42 was it and I thought it was "too...
What is wrong with a 3.73? That is quite deep compared to the 3.42 "deepest" axle ratio on many GM 1/2 tons built in the last 10 years. I towed...
CR lost all credibility with me 20 years ago or so when they downrated a GM pickup for "riding like a truck"
I'm sure it turns real good too. I more impressed that the RAM didn't have a factory receiver hitch on it.
So how did they know he was over the payload rating? Did they weigh the wrecked car and pick up all the firewood and weigh it too?
If the trailer weight with contents is KNOWN (weighed on an accurate certified scale) and is found to be LESS than the tow rating of a vehicle AND...
Hook it up and go. You are pulling 560 miles a year perhaps. You don't have to pull @ 70 MPH. Last I understood euro tow limits tend to be...
Looks like the jaw doesn't slide like it should? Use PB Blaster, it's cheap and it can be bought at Walmart. Clean everything up (take it...