Separate names with a comma.
Hi Everyone, I haven't been on the portal for a long time. I hate to say it but I don't like the new format of the site so i don't use it much...
I have a 2002 Coleman Cottonwood with 15 inch tires. I replaced mine with 20 inch crank downs and it was the best thing I have done for a mod. I...
Our PUP takes 13 inch tires 6 ply.and I just bought two of them at Tractor Supply and had my mechanic mount and balance them on the old rims. They...
Find the cheapest 1/2 inch drive about 8 inches long. Then get a cheap 1/2 deep socket that will fit into the tupe of your camper lift. Then I...
It will probably do fine until you have to go up hill. Starting with the 2004 Toyota added a bit more to the engine. You have the smaller engine....
Those are very nice. Where do you find all the old instruments? John & Kitty (Empty Nesters)<img src=../Images/icons/icon_smile_camping.gif...
Try using Woolite. You may be surprised and it's recommended by Coleman. John & Kitty (Empty Nesters)<img...
Al & Debbie, VT has the same forcast and were gone too. John & Kitty (Empty Nesters)<img src=../Images/icons/icon_smile_camping.gif border=0...
Popped 'er up after work and the DW will get it ready for the Saturday trip. No sign of mice, everything wintered well. I won't dewinterize the...
I agree with Yellowkayak, I've used my cordless drill for two years now and that's the way to go. It even cranks down my stabilizers. John &...
I have a Hayes endeavor controller and there are adjustments you can make at the controller itself that has to do with the weight of the trailer....
Don't ever be afraid to just pull ahead and get the TV and camper straight and begin again. Sure beats jack knifing or runnig the PuP into...
Thanks Lou. I plan to do some clean up around the camp area. Bringing the chain saw and some wood to repair the picnic table etc. That's fun work...
I have a 2002 Cottonwood which became the Seapine and I have two. John & Kitty (Empty Nesters)<img src=../Images/icons/icon_smile_camping.gif...
Today I finished putting new tires on the PuP and I also cleaned, inspected and repacked the bearings. Tomorrow the DW gets the registration...