Separate names with a comma.
The unhappy Evolution owners are those with the Fiton roof...the later models are aluminum and are more or less trouble free. Sent from my...
Not to mention that the heavy spot is slapping the road every revolution. I would think that constant slapping would eventually fatigue the tire,...
Find a 50W gear oil off any part house shelf...doubtful. And the argument that a 50w will run cooler, just how much cooler? I doubt you would...
Lie-o-meter...
I had my Tekonsha installed in three different trucks, it had nearly a millions miles of road time on it between the three and I still have it....
There is space between the spindle nut/washer and the hub that the grease flows around (there had better be, or your hub wouldn't turn). The...
No, any type of general gear oil (ie. 80w90) is used in hubs...any thing thinner is for fuel efficiency. I have nothing to add, I don't see any...
Make sure you know how to defeat the traction control feature (goes for anyone, even those not playing around)...it has a place, but it also has...
There is a break over point on the whole mileage thing. A small engine may be more efficient, but it has to work hard to move a big vehicle;...
Yeah, 4-6 MPG increase...riiiiiiiiiight... IF YOU CAN KEEP YOUR FOOT OUT OF IT! [:D] Its always a nice thought though...
Right now they are in the 400HP range and 850TQ...before too long, they will be going back the other way because the drive trains can't handle it....
Its not like I'm hiding it, its part of the sticky at the top of the forum...about tire speeds. Its Hercules, their Power STR is rated at 75mph.
Speaking of the newer stuff out there...07.5+ was one of the last emissions jump if I remember correctly. There should have been another within...
That's what I did with regards to the speed rating...everyone had a default "65mph" answer for an ST tire. Called the manufacturer and found I...
Yup, a 12-valve Cummins redlined about 2250RPM, and pulled every bit as hard as my 3rd gen 24-valve common rail Cummins that redlined at...
