Search results

I've got a couple that are this way. Pricy little dudes.

Then he can glue the tongue and groove joints together with wood glue.

Just replace the whole unit> I did on mine and got away for chasing parts then another would go out etc.. For 18 to 20 bucks replace the whole thing. Done!

Laying down a vapor barrier with 2" inch of over lap around peramiter then lay flooring down with 1/4" edge gap, lock panels together full float the floor and use 1/4" round trim to hold down into place. I didnt' use any glue or nails other than the trim around the cabs and walls. Works great!

I had the same happen on my unit. Come to find out the thermostat was faulty and would sometimes make contact and then not, Once the unit cycles and does not ignite it just trips off. This is the only thing I could find. replaced thermostat and all is good.

Good to know, I have the Mach 3 after looking at the unit. Might have to measure the opening.

Hello, campers I'm wanting to replace my gasket seal at roof between the a/c unit and roof etc.. I want to order all parts needed but but sure if all or most manufacturers use the same 14"x14" cut opening. Is this size cut out opening common? Thanks

Oh wow! I never thought about the A/C, Man I need to do some good looking into all this I guess. Do you know how thick this board is?

For the ones that have done roof repairs on 2005 to 2006 Fleetwoods, I might need some help understanding the construstion of the roof. Of course I could pull the A/c unit and see! But I figure I could get some per-help here. Is it In this order? Aluminum styrofoam Plyboard (How thick?) What...

For the ones that have done roof repairs on late model Fleetwoods, I might need some help understanding the construstion of the roof. What I thought was water damage from old caulking, come to find out it's from carpenter ants nest. They have completely destroyed the right rear corner of roof...

It's called flex pool line I got all the parts from Lowe's. It's like about 3.50 a foot.

This is my custom drain system for the gray water. It connects my shower drain and my sink drain into one point drain. I have other parts to it for diffrent application setups. This one in the picture is for sewer at a site when camping. None of it is glued at all, just press fitting 1-1/-2" PVC...

Ok thanks that gives me some leads!

Hello all! I've have not been here in awhile. I've Got a question about getting parts. My 2006 Fleetwood timberlake popup is starting to show it's age. I take good care of this thing on and off season etc.. But it seems I'm getting the great cheap OEM parts are starting to brake! First off, the...

Yea spiders love the propane smell, O don't know why? I just put foil duct type over all my gas fittings and tips. Keeps them out and is easy to remove. 2005 Fleetwood Temberlake fully loaded 1999 Jeep Wrangler TJ

Ok! I must say the Guys over at RVP products are fast shippers, nice guys to deal with. The new product has a diffrent styled and improved PTCR. Thanks for the help overyone! 2005 Fleetwood Temberlake fully loaded 1999 Jeep Wrangler TJ

I see! Thanks for your input. 2005 Fleetwood Temberlake fully loaded 1999 Jeep Wrangler TJ

Oh thanks alot! I have been reading thru these posts and people are adding fans to the outside vent, are they pulling air out or pushing air in to cool the space? i would think out, Is this correct? 2005 Fleetwood Temberlake fully loaded 1999 Jeep Wrangler TJ

Hello all! I have a dometic 3-way fridge, not sure what model etc.. The dial knob that go's 1 thru 7. What setting sets the fidge to the coldest setting 1 or 7? The manufacturer operation manual shows the knob control but does not explain the setting per 1 thru 7. I was wondering if anybody...

yea I hear you!, I use to test capacitors with my tongue, LOL! I overlooked everything, cleaned both coils, Lubed main fan and blower shaft, cleaned out crap from bottom drain pan. I have tested all circuits, all are good. These PTCR's heat up to 160 degree's. The guys at RVP told me they can go...