Separate names with a comma.
The front face of the converter likely pulls off to expose the 12v fuses, and perhaps 110v circuit breakers. _
Your refrigerator will most likely draw way too much current on 12v DC to be viable; the battery would be dead within hours. I would expect to...
Closer pic of the switch? Year of your camper? EDIT: it also looks like the cushions should be pulled into the footwell a bit, and the back...
Welcome from Parker, CO!
It might help to know what your Tow Vehicle (TV) is. Many people put that in their signature. Some TVs have separate trailer wiring fuses; my...
Do it in the shade if possible, and put a dark towel over your head and the body of the PuP. Act like an old-time photographer. And it's not a...
Will the lower panel raise and latch into the inside track notch? I don't recall if the lower panels are movable. The bend in the panel frame is...
I'd clean out the latch with a liberal amount of brake cleaner and let that dry. Then use a teflon lube on all of the moving parts. Your latch...
I don't recall exactly but I think I raised up the sliding panel all the way, pulled in the catches, lowered one side and turned/twisted it to get...
Although rare, you could have a wire that can't handle the load of the circuit, as in a wire that has rubbed or been flexed enough to break some...
Always great pics; thanks for all of them! _
Perhaps unrelated, but I would question the use of a 1A fuse in the #2 DC circuit. What does that circuit feed? Typically circuits 1, 2 & 3 are...
I put them on Craigslist or some other neighborhood forum for free. Always someone needing a loose wheel.
Is there a weight sticker on the driver's side (left) panel, near the front of the camper, that shows the weight values? If so, that may have a...
I used white lithium grease on my Coleman Cheyenne's slipper springs, where they "slip" on the frame. You will probably want to figure out what's...
If I recall correctly I re-screened my '02 Coleman Cheyenne's right on the door. I think the bottom spline was the most difficult part. _
Sounds good. Remember that you should have the camper hitch level or a little down in front, never high, to help prevent sway. _
Keep in mind that some vehicles have separate fuses for the trailer connections. My Tahoe even has individual fuses for the trailer turn signals...
How to measure hitch height: https://www.etrailer.com/faq-ballmount.aspx It seems to me that the standard height of a trailer, if there is one,...
I like this idea and will try it next time I open a tube of caulk and don't use it all. I'm forever tossing the "cured" ones. _
