Yeah. It sounded like household AC wiring with black/white/ground. In his case though it looks similar to mine since he has two red wires. My guess for him would be that the reds go to positive and the blacks to negative. With DC they really should keep to a standard of not using black to...
I drained the water heater and was wondering if it would be better to loosely reinstall the rod, or leave the opening to air out. Another option would be to stuff a little rag or something into the opening. My guess is the anode rod might continue to corrode a bit due to evaporation of the...
First, attach all the velcro to the door which should be reasonably easy.
Next, zip the four zippers that lead to the bunk ends.
And last, install the tension poles for the bunk ends.
I like to use Protectall wax on the outside of all of my canvas once a year which keeps it pliable, and helps...
No offense but you really need the help of someone more familiar with doing this kind of work. That being said, I would ONLY put the reds to positive. The blacks typically go to negative. The white typically goes to negative. The green typically goes to negative.
Considering the risky way you...
Removing the valance has been annoyingly difficult and I was always worried the clips would break. A simple solution is to just use something like wire cutters to snip off a small piece of the track. In the included photo, I made a vertical mark that shows the width of one clip. Then I used wire...
Important!
If the fridge runs off of propane, then any cutting into that cabinet ultimately has to be sealed tight with some sort of gasketing or flexible caulk. Otherwise, propane exhaust fumes from the refrigerator will continuously enter your popup which is especially bad when you close all...
Yes I know it's a very old thread..
It's a shame when someone had a great idea and posted it with pictures only to have the pictures unavailable in the future. I wish images were always imbedded in the website rather than pointing to something like Photobucket. We lose the images if the person...
Help! Any brake and wheel hub gurus out there?
I am trying to buy a new electric brake assembly and repack bearings etc. for our
2008 Forest River Flagstaff MAC / LTD 205.
The problem is that I am getting conflicting info when searching parts.
The hubs are stamped 8440. They are 7" diameter...
Does anyone store their propane tank inside the camper and just hook it up on the ground at the campsite? That would make plenty of room for two batteries and help with balance.
Thanks for the feedback. At least you have a good baseline of what the actual finish is. Beyond that, I don't think you can improve it without actually going through polishing grits. But, I bet it looks great when it's full of food! ; )
Sometimes mineral deposits are present on surfaces which lock in stains and make surfaces look dull. Starting with a clean pot, try pouring in a half inch or so of white vinegar and let it soak overnight. Use a scrub brush or similar a couple of times throughout the soaking. Then drain and wash...
In my case, the port is behind the small area that has the inverter, the gfci outlet, water pump switch, and propane detector. But there isn't anyplace to bring an extension cord through to the gfci outlet.
Sorry but I don't know what mooch docking means. So does anyone know for sure what the second hatch is for? I have the same thing on my 2008 Forrest river flagstaff 205 Mac. BTW, I'm currently using it to store the 15/30 amp adapter because it felt good to give it a purpose. ; )