Separate names with a comma.
Discussion in 'My Favorite Mods, Tips, Tricks (and Blunders!)' started by kitphantom, Apr 1, 2020.
See now that looks great.
I walked by my pup, ran my hand down it’s side and told it “ everything is going to be alright. This will all be over soon then we’ll have a good time camping again”
At first I thought you were talking about a 4-legged pup. Works for that too!
I got most of my EMC-HW30C install done. I just need to mount the little display box. I did vacuum out the area behind the converter. DANG there was a TON of sawdust back there. I guess cleaning up during manufacture isn't on the to-do list.
Filled in the last night of reservations for our October trip to Grand Canyon, overnight at Wahweap CG at Lake Powell. Not a pretty campground by any means, but it is a handy place for a night or two in transition, we can restock groceries, etc. in Page.
Temps are back in the mid-30s today, we've had rain, huge snowflakes, but it's not sticking, so I'm staying in the house today, not spending time in the trailer.
I went down the rabbit hole of fixing the rotten corners of my Clipper boot. I started with just the end portion of the floor but it lead to each front corners having to be rebuilt and then I covered the inside and outside with Diamond Plate. This also resulted in fresh tongue paint, hinges painted and new marker lights.
We put ours back away, because we can't go camping right now.
Charged the battery the other day!
Amazing how one thing leads to another.
Looks great ......
Putting a new power converter in. The wfco cooling fan stopped working. Lets see how the progressive does..
same with me
Filled the truck full of fuel. While prices are still cheap I will be ready when the campgrounds open back up!
im replacing the inside/outside table with a pedestal table. it should make it easier to get in/out of the far seat. the top will be 10" shorter in length and a little narrower.
new pedestal table2 by mk4 posted Apr 18, 2020 at 8:55 AM
new pedestal table1 by mk4 posted Apr 18, 2020 at 8:55 AM
new pedestal table3 by mk4 posted Apr 18, 2020 at 8:55 AM
Pedestal table rotates for greater entry room
new pedestal table4 by mk4 posted Apr 18, 2020 at 8:55 AM
old table1 by mk4 posted Apr 18, 2020 at 8:55 AM
Old table with no room for entry
old table2 by mk4 posted Apr 18, 2020 at 8:55 AM
That looks really good. The pedestal mod has been on my radar for a while
The single post leg letting the table turn is a very good idea.
I did away with the 2 post pedestal table, couldn't move it and it was loose into the floor, but first I changed it to a table that hung on the wall with one fold up leg. With it like that I could slide it sideways (like my old Jayco did) if I wanted to. Final I just removed it altogether. WE now use smaller free standing tables. I also now put my dinette cushions end to end along the wall to open up the camper even more. Not saying you should this, just shooting out some ideas.