Newby PU owner needs help!

Discussion in 'Introduce Yourself' started by Carefree Traveller, Mar 6, 2021.

  1. Carefree Traveller

    Carefree Traveller New Member

    Messages:
    5
    Likes Received:
    3
    Joined:
    Mar 6, 2021
    Hi, We bought a 1997 Palomino Stallion. It is our first PU and are renovating it for this summer!! When lowering the roof, it noticed that it always lowered about an inch to one side. After checking all the arms, we discovered that the 3 of arms attached to the roof have been bent (where it attaches to the roof). I called Goshen (they are great!) and have ordered 4 new tubes, but I can't find out exactly how to replace a single tube in the telescoping arm?
    Do I have to remove the whole arm or is there some way to just replace the one part without taking the whole thing apart?
    How do I remove the arms if that is what I am going to have to do?
    Any suggestions would be great... thx
     
  2. WrkrBee

    WrkrBee Well-Known Member Silver Supporting Member

    Messages:
    5,260
    Likes Received:
    2,599
    Joined:
    May 23, 2018
    Location:
    South Carolina
    Call Goshen again. See if directions are being sent with the purchase or emailed to you.
     
  3. megcabra

    megcabra Well-Known Member

    Messages:
    2,661
    Likes Received:
    679
    Joined:
    Aug 12, 2015
    Location:
    Chapel Hill, North Carolina
    Welcome and greetings from North Carolina to the portal!

    Best of luck with Goshen.
     
  4. Carefree Traveller

    Carefree Traveller New Member

    Messages:
    5
    Likes Received:
    3
    Joined:
    Mar 6, 2021
    Thanks everyone for the welcome and for the response - I did ask Goshen and she thought instructions would be included but I thought I would try to find out extra information in preparation for my delivery...
     
    WrkrBee likes this.

Share This Page